2PN40/NPY/0 AS FR Black
international designation:
Flame retardant construction with quiet running bottom fabric is extremely flexible and highly suited for 45 degree logistics transfers, carrier cells, packaging applications, troughing requirements, inclines and a variety of general transport needs.
Construction:
Covering Surface
Conveying Surface Material
Conveying Surface Profile
Conveying Surface Color
Conveying Surface Coefficient of Friction
Tension Member
Tension Member Material
Tension Member Plies
Underside
Underside Material
Underside Profile
Underside Color
Underside Coefficient of Friction
PVC
Negative Pyramid
Black
N/A
Polyester Fabric
2
Polyester Staple Fabric
Low Noise
White
0.25
Technical Specifications
Overall Thickness
Weight
Maximum Width
Min. Pulley/Nose Bar Diameter for Recommended Endless Splice*
*Min. pulley diameter can vary when mechanical lace is installed
Minimum Back Flex
Load for 1% Extension (Dynamic)
Standard Tension
Product Operational Temperature Range
Cover Durometer
2.10 mm (0.083 in.)
2.10 kg/m² (0.43 lbs./ft²)
1,650 mm (64.961 in.)
30.00 mm (1.181 in.)
40.00 mm (1.575 in.)
4 N/mm (22.84 lbs./in.)
0.5%
-10/70 °C (14/158 °F)
40 Shore A
Pulley Diameter, Minimum
Features
FDA
USDA Meat and Poultry
USDA Dairy
Anti-Microbial
Anti-Static
Flame Retardant
Cross Rigid
No
No
No
No
Yes
Yes
No
Bucket Projection, Maximum
Belt Strength:
Standard Fabrications
Longitudinal Splice
Guide Applied to Cover
Footed Sidewall
Edge Capped
Cleats
Guide Applied to Bottom
Footless Sidewall
Plastic Spiral Lace
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Splice Instructions:
High Speed Press Settings
High Speed Press Pressure (psi)
High Speed Press Temperature (top)
High Speed Press Temperature (bottom)
High Speed Press Time
High Speed Press Foil Position
High Speed Press Foil
High Speed Release Top/Bottom
Water Cooled Press Settings
Water Cooled Press Pressure (psi)
Water Cooled Press Temperature (top)
Water Cooled Press Temperature (bottom)
Water Cooled Press Time
Water Cooled Press Foil Position
Water Cooled Press Foil
Water Cooled Release Top/Bottom
30
175 °C (347 °F)
175 °C (347 °F)
240 s
Top
Black PVC
Impression Pad/Rough Teflon
30
175 °C (347 °F)
170 °C (338 °F)
210 s
Top
Black PVC
Impression Pad/Rough Teflon
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Standard Splices
Endless
Clipper Lace
Staple Lace
Single Finger
UCM36 SP
RS62
Suggested Fasteners:
Misc:
Other:
