1P40/05/05 F M Blue
international designation:
Laterally rigid 1 ply food grade PVC cover by cover. Excellent for corrugated loop pillow covers.
Material Construction
Covering Surface
Conveying Surface Material
Conveying Surface Profile
Conveying Surface Color
Conveying Surface Coefficient of Friction
Tension Member
Tension Member Material
Tension Member Plies
Underside
Underside Material
Underside Profile
Underside Color
Underside Coefficient of Friction
PVC
Matt
Blue
N/A
Polyester Fabric
1
PVC
Negative Pyramid
Blue
0.40
Technical Specifications
Overall Thickness
Weight
Maximum Width
Min. Pulley/Nose Bar Diameter for Recommended Endless Splice*
*Min. pulley diameter can vary when mechanical lace is installed
Minimum Back Flex
Load for 1% Extension (Dynamic)
Standard Tension
Product Operational Temperature Range
Cover Durometer
1.80 mm (0.071 in.)
1.80 kg/m² (0.37 lbs./ft²)
3,000 mm (118.125 in.)
15.00 mm (0.591 in.)
20.00 mm (0.787 in.)
4 N/mm (22.84 lbs./in.)
0.5%
-10/80 °C (14/176 °F)
80 Shore A
Pulley Diameter, Minimum
Features
FDA
USDA Meat and Poultry
USDA Dairy
Anti-Microbial
Anti-Static
Flame Retardant
Cross Rigid
Yes
No
No
No
No
No
Yes
Bucket Projection, Maximum
Belt Strength:
Standard Fabrications
Longitudinal Splice
Guide Applied to Cover
Footed Sidewall
Edge Capped
Cleats
Guide Applied to Bottom
Footless Sidewall
Plastic Spiral Lace
No
Yes
No
Yes
Yes
Yes
No
No
Splicing Instructions
High Speed Press Settings
High Speed Press Pressure (psi)
High Speed Press Temperature (top)
High Speed Press Temperature (bottom)
High Speed Press Time
High Speed Press Foil Position
High Speed Press Foil
High Speed Release Top/Bottom
Water Cooled Press Settings
Water Cooled Press Pressure (psi)
Water Cooled Press Temperature (top)
Water Cooled Press Temperature (bottom)
Water Cooled Press Time
Water Cooled Press Foil Position
Water Cooled Press Foil
Water Cooled Release Top/Bottom
30
170 °C (338 °F)
170 °C (338 °F)
120 s
Top
Blue PVC
Matte/Impression Pad
30
170 °C (338 °F)
170 °C (338 °F)
60 s
Top
Blue PVC
Matte/Impression Pad
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Standard Splices
Endless
Clipper Lace
Staple Lace
Single Finger
UCM36 SP
RS62
Suggested Fasteners:
Misc:
Other:
