Beltservice Corporation is a full service, stocking distributor of the finest solid woven and nonwoven air permeable fabrics available. These fabrics are engineered specifically for air gravity conveyors and fluidized beds. All are carried in large inventories for fast delivery.
Air Permeable Fabrics Brochure
Polyveyor Needled Polyester
Polyveyor was specifically designed to be the ideal membrane for fluidized bed and air gravity conveyors. Its needled construction provides uniform and consistent air flow across the entire surface of the fabric. This in turn means maximum conveyor efficiency and output.
- Model 1950 Low Permeability
- Model 1951 Medium Permeability
High Temperature Polyveyor/Kevlar
Kevlar fabric is needled into a Polyveyor 1951 polyester base. This versatile fabric is rated for temperature range of 500°F continuous or 600°F intermittent.
- Model 5925 High Temperature Polyveyor/Kevlar
When Polyveyor is manufactured, nearly sixteen inches of 100% Polyveyor fibers are layered over a special scrim and continually needled and compressed, until a smooth 1/4" thick material is formed. In addition to uniform thickness and consistent airflow, Polyveyor provides other advantages.
Polyveyor will not unravel when cut or perforated, so heat sealing is not required on cut edges. This not only adds to the ease of installation, but makes Polyveyor ideal for bends or other unusual shapes that are encountered.
Industries & Applications
For fluidized beds or air gravity conveyors used to transport dry powdered materials such as:
- Barite (Drilling Mud)
- Fly Ash
- Silica Sand
Fluidized beds can be found in the bottoms of silos, trailers, railcars, ships and barges. A wide variety of dry bulk powders are carried using this "Live Bottom" technology for emptying vessels and storage containers. This method is extremely efficient, has a low operating cost and is often the most economical to purchase and install.
Polyveyor's needling process eliminates the need to stretch the fabric during installation because Polyveyor already has the proper permeability. Simply install Polyveyor taut over the air chamber and bolt in place. The special scrim, constructed for lateral rigidity and superior bolt holding strength, minimizes the sag often found in other air permeable membranes. Finally, the thousands of pores needled into Polyveyor are so fine that product sifting down into the air chamber is minimized, or in some cases, completely eliminated.
Three styles of solid woven polyester are:
- WPLP Low Permeability 100% Woven Polyester
- WPHP High Permeability 100% Woven Polyester