AVAILABLE COMPOUNDS BeltTS drainage belts are custom manufactured using the best choice from a variety of tested compounds to meet the specific temperature and pH of slurry liquor or wash solution. Filter Belt Rubber Compounds According To Process Parameters: NR - Natural Rubber CIIR - Chlorobutyl SBR-MT and SBR-HT - Styrene Butadiene Rubber, meduim and high temperature CR - Neoprene EPDM - Ethylene-Propylene Diene Monomer CSM - Hypalon EPM - Ethylene-Propylene Monomer NBR - Nitrile Rubber BIIR - Bromobutyl CDB - Food Quality Rubber (White Rubber) 100 90 80 70 60 50 40 30 20 FGD PROCESS T slurry: 65°C PH: 6-8 Supplied & Tested: SBR-MT 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PH VALUE Temperature ALKALI PROCESS ACID PROCESS °C KCI- SYLVINITE T: 30°C PH: 7 Supplied & Tested: SBR-MT JAROSITE FILTRATION T: AMB PH: 2-4 Supplied & Tested: SBR-MT ACID ACETIC PROCESS T slurry: 40°C PH: 2-4 Supplied & Tested: CR PHOSPHORIC ACID DI-HYDRATE T slurry: 85°C - 90°C PH: 1-3 Supplied & Tested: SBR-HT ZEOLITES & ALUMINA T slurry: 90°C PH: 11-12 Supplied & Tested: CR CAUSTIC SODA (BAUXITE) T slurry: 95°C PH: 13-14 Supplied & Tested: BIIR, EPDM URANIUM LEACHING T slurry: 95°C PH: 2-3 Supplied & Tested: CR BORIC ACID T slurry: 80°C - 105°C PH: 0.1 - 0.5 Supplied & Tested: CIIR FLUROSILICIS ACID T slurry: 80°C - 105°C PH: 0.1 - 0.5 Supplied & Tested: CIIR PHOSPHORIC ACID HEMIHYDRATE T slurry: 80°C - 105°C PH: 0.5 - 1.5 Supplied & Tested: BIIR, CIIR, EPDM FGD PROCESS STEAM CAKE INJECTION T slurry: 85°C PH: 6-8 Supplied & Tested: SBR-HT