FabClimb Integrally Molded Heavy Duty Belting DISTRIBUTED BY: Fabflex Division 696 W. Amity Rd, Boise, ID 83705 PH: 800-423-4469 or Fax: 208-343-8043 sales@beltservice.com, www.beltservice.com Cover gauge .................... 3/16”top x 1/16”bottom Belt cacass gauge ..................................... .1410” Working tension rating ............................. 240 lbs Cover grade .............................................. RMA II Construction warp ................................. polyester Construction fill weft ................................... nylon Carcass fabric ................................................. 80 Cover tensile strength .................... min. 2200 psi Cover elongation ................................ min. 400 % Cover hardness ......................... 60 ± 5 (shore A) Minimum pulley diameter .......... (per application) Temperature range .............................. 0º/180º F Beltservice FabClimb Belt Specs FabClimb Splicing Options Super-Screw Flexible Lacing With Self Tapping Screws • No drilling preparation or template • Screws drill themselves through the belt • Good compatability with scrapers • Long service life • Installation regardless of weather conditions • Has the highest practical strength • Long service life when correctly applied • Smooth and continuous surface at the splice • Conveyed material can’t seep through the splice • Reduces wear to skirtboard rubber and idlers Hot Vulcanized Splice All sales are subject to Beltservice’s standard terms of sale contained in its invoices, copies of which will be provided upon request. Your order will be deemed an acceptance of those terms. 12” 9” 9” 15” 13” 31” 17” 22” 10” 13” 10”