FABSYN SPECIAL PROFILES MOLDED AND CURED IN ONE OPERATION Belt Description 2-Ply FABSYN COS Corrugated 2-Ply FABSYN COS Asender 2-Ply FABSYN COS Top Flight 2-Ply FABSYN COS Crosstop Covers 1/32” x FS 1/32” x FS 3/64” x FS 3/64” x FS Oil Resistant Excellent Excellent Excellent Excellent Total Belt Thickness 3/16” 1/4” 5/16” 1/2” Wt.Per Sq. Ft. .82 lbs .82 lbs 1.14 lbs 1.14 lbs Temp. Range F 0˚/220˚ 0˚/220˚ 0˚/220˚ 0˚/220˚ Min. Pulley Dia. Inches 2 2 2 2 Fasteners Flexco 62 or 7 62 or 7 62 62 Fasteners Clipper 1 or 2 1 or 2 2 2 Working Strength PIW 100 lbs. 100 lbs 100 lbs 100 lbs Top Flight™ • Lateral cleats 3/16” high on 6” centers. • Longitudinal cleats 3/16” high on 4” centers. • Raised buttons at corners of pattern allow for drainage of wet product. • Operates like a flat belt. • Replaces other cleated belts or flat belts where roll-back is a problem. • Patented design, runs on all types of conveyors without special idlers. Corrugated™ • Rounded Ribs, 1/16” high on 1/4” spacing, center to center. • Designed to provide positive discharge for sliced and diced food products. Asendor™ • Ribs 1/8” high on 1” spacing. • Designed for incline conveying of small and medium sized food products. • Ribs rounded for more resistance to wear and abrasion; and less product bruising. • Special rib design reduces resonance on return idlers. Crosstop™ • Cleats 3/8” x 3/8“ taper down to 1/4”. • Pattern provides constant belt support from the conveyor return idlers – runs as smooth and effortlessly as a flat belt. • No special return idlers required. • Open 8” x 8” pattern allows water drainage and ease of cleaning. Fablon Special Profile Belts On Heavy-Duty Synthetic Fabric