FABLIFT CLEAT SPECIFICATIONS Cleat Height: 1” (square) Cleat Thickness: 1” Cleat Spacing: 10” (centers) Cleat Type: Parallel Overlap Cleat hardness 45 ± 5 (shore A) BELT SPECIFICATIONS Constructions available with various cover gauges and compounds. Base Fabric: Synthetic Cover Compound: SBR Temp. Range: -20° / 180° F Minimum Pulley Diameter: 8” Base Belts Available In Following Working Strengths • 150 lb. • 220 lb. • 240 lb. • 330 lb. • 400 lb. 1” 1” FABLIFT CLEAT PROFILE LEADING EDGE SECTION A-A ROTATED 90°-CW Fablift has a unique cleat design that provides smooth, reliable product delivery in demanding incline applications. It is made with a 1” square cleat on 10” centers. Fablift’ belts are capable of transporting larger rock, recycled asphalt, and frequently are used on tub grinders. Molded cleat cut-outs allow for easy troughing. Available in belt and cleat widths up to 48”. Fablift 1” Tall Cleat Width 15½” - 45½” 10” Belt Width 18” - 48” BULLHORN CLEAT SPECIFICATIONS Cleat Height: 1/2” Cleat Thickness: 1/2” (square) Cleat Spacing: 6” (centers) Cleat Type: Parallel Overlap BELT SPECIFICATIONS Constructions available with various cover gauges, compounds and with or without center support rib. Base Fabric: Synthetic Cover Compound: SBR Temp. Range: -20° / 180° F Minimum Pulley Diameter: 8” Base Belts Available In Following Working Strengths • 150 lb. • 220 lb. • 240 lb. • 330 lb. • 400 lb. Bullhorn has a 1/2” x 1/2” low profile cleat molded on a 6” centerline that offers smooth delivery of planed asphalt, gravel, wood chips and is frequently used on stone slingers. Available in belt widths from 12” to 60” and cleat widths from12” to 48”. Bullhorn is designed to maintain constant contact with return idlers and can be troughed as necessary. Bullhorn ½” Tall Belt Width: 12”- 60” Cleat Width: 12”- 48” (In 1”Increments) 6” 1/2” 1/2” CLEAT PROFILE