BIGHORN CLEAT SPECIFICATIONS Cleat Height: 3/4” (rounded top) Cleat Thickness: 3/4” Cleat Spacing: 9” (centers) Cleat Type: Parallel Overlap Cover hardness 60 ± 5 (shore A) BELT SPECIFICATIONS Constructions available with various cover gauges, compounds and with or without center support rib. Base Fabric: Synthetic Cover Compound: SBR Temp. Range: -20° / 180° F Minimum Pulley Dia.: 8” Base Belts Available In Following Working Strengths • 150 lb. • 220 lb. • 240 lb. • 330 lb. • 400 lb. 3/4” 3/4” BIGHORN CLEAT PROFILE LEADING EDGE SECTION A-A ROTATED 90°-CW Bighorn ¾” Tall Cleat Width 12” - 48” 9” Belt Width 12” - 60” Bighorn belting offers a 3/4” high x 3/4” thick rounded cleat on 9” centers. Bighorn is ideal for the smooth delivery of loads requiring a cleated belt for steep elevation of product. Used frequently for planed asphalt, sand, rock,and heavy duty materials. The Bighorn is available in belt widths from 12” to 60” and cleat widths from 12” to 48”. CLEAT PROFILE BELT SPECIFICATIONS Cover Gauge 3/16” (top) x 1/16” (bottom) Belt Cacass Gauge .1410” Working Tension Rating 240 lbs Cover Grade RMA II Construction Warp Polyester Construction Fill Weft Nylon Carcass fabric 80 Cover tensile strength min. 2200 psi Cover elongation min. 400 % Cover hardness 60 ± 5 (shore A) Cleat hardness 45 ± 5 (shore A) Minimum pulley diameter (per application) Temperature range 0º/180º F FabClimb is made with abrasion resistant 1-1/4” high tapered cleats with a “Y” cleat center pattern that increases produc- tion capacity. Two cleat widths are available: 31” on 13” centers, and 23” on 12” centers. Applications include cold planers planers, wood chips, coal & salt, grain, and construction materials. FabClimb 1¼” Tall Belt Width 24”- 39 ” 23” 12” 8 1¼” 31” 13” Belt Width 32”- 47¼” FabClimb 1¼” Tall