A blast belt is a highly fabricated belt used in airless roto-blast cleaning machines, tumbling items being cleaned or deburred through a stream of abrasive particles. Blast belts are usually perforated endless belts with tumbling ribs across the face of the belt. The ribs tumble the products being cleaned, exposing all surfaces to the action of the abrasive media. This media passes through perforations in the belt and is recycled through the system. Blast belts may also be equipped with bottom tracking v-guides, special covers, and unique cross rigid carcass. State-of-the-art CNC hole punching capabilities assure clean and consistent perforations for efficient recycling of abrasive media. A wide variety of standard hole sizes and patterns are readily available for any tumble blast application. Custom sizes and patterns can also be created for that “unique” or one-of-a- kind application. Tumbling ribs are permanently bonded onto the belt surface with our patented “Thermo-Cure” bonding process. This ensures a strong, rugged bond with no rough edges or gaps to catch or tear the tumbling rib from the belt. Tumbling ribs are available in different profiles for the specific tumbling action required. *Most orders can be shipped in 1 or 2 days when quick turn-around is required. Surface Detail WHAT IS A BLAST BELT? TOUGH BELTS FOR HARSH ENVIRONMENTS Jagged flashing, sharp burrs, and impacting shot are just some of the factors that create extremely harsh environments for rubber mill belts. Only a properly specified belt will yield an acceptable service life in this application. Metal Finishers | Foundries | Auto Rebuilders | Metal Platers | Heat Treaters | Fabrication Shops We stock an extensive inventory of belts for airless roto-blast cleaning machines. Tumble Blast Belts | Rubber Blast Pads | Urethane Blast Pads | Vestibule Curtains Room Liners | Elevator Belting | Roll-up Doors | Tough Sheet Rubber Gum Rubber | Finger Seals | Custom Parts