b'Belting Specification SheetCatalog # 61b Pulley Diameter, MinimumItem number: 10628 Minimum Pulley Diameter 2.50 inDescription:3 Ply 150 Blue Carbox Nitrile RT x FS Belt Strength:International Designation: Tension Rating (PIW) 150 PIWN/AConstruction: Splice Instructions:Compound Top Cover Blue Carbox Nitrile Splice Step YesColor Blue Splice Finger NoTop Cover Thickness (in) (0.00 mm) 0.00 inTop Cover Description Roughtop Other:Static Conducting NoCompound Bottom Cover Black Nitrile Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top YesOil Resistant YesNumber of Plies 3 Fire Resistant NoOverall Gauge (in) (7.14 mm)9/32 in FDA Approved NoUnit Weight- lb/PIW 0.1040 lbs/PIWSuggested Fasteners:Carcass Type Polyester Flexco Plate/Rivet N/ACompound Blue Carbox Nitrile Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #125Clipper Lace #2Temperature Range (F)- Low 0 F Alligator Lace #15Special Characteristics:Carbox nitrile roughtop yields vastly longer service life than rubber roughtop. It is ideal where regular roughtop surfaces wear down quickly and must be replaced. This belt is popular for handling cardboard cartons.*****All Values are nominal and subject to change without notice.*****'