b'Belting Specification SheetCatalog # 58 Pulley Diameter, MinimumItem number: 10668 Minimum Pulley Diameter 2.50 inDescription:3 Ply CP30 Tan Rubber Roughtop x FS Belt Strength:International Designation: Tension Rating (PIW) 90 PIWN/AConstruction: Splice Instructions:Compound Top Cover Tan SBR Splice Step YesColor Tan Splice Finger NoTop Cover Thickness (in) (0.00 mm) 0.00 inTop Cover Description Roughtop Other:Static Conducting NoCompound Bottom Cover Tan SBR Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top YesOil Resistant NoNumber of Plies 3 Fire Resistant NoOverall Gauge (in) (7.94 mm)5/16 in FDA Approved NoUnit Weight- lb/PIW 0.1000 lbs/PIWSuggested Fasteners:Carcass Type Cotton-Polyester Flexco Plate/Rivet N/ACompound Tan SBR Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #125Clipper Lace #1Temperature Range (F)- Low -40 F Alligator Lace #7Special Characteristics:The tan color is non-marking. The tan rubber is more economical, yet highly serviceable.*****All Values are nominal and subject to change without notice.*****'