Catalog # 50 Description: 3 Ply HSW 1/8in Urethane x FS International Designation: N/A Item number: 11041 Pulley Diameter, Minimum Minimum Pulley Diameter 8.00 in Construction: Compound Top Cover Color Smooth Black PU Black Top Cover Description (3.18 mm) 1/8 in Top Cover Thickness (in) Bottom Cover Description Friction Surface Compound Bottom Cover Black SBR Bottom Cover Thickness (in) (0.00 mm) 0.00 in Number of Plies 3 Overall Gauge (in) (7.94 mm) 5/16 in Unit Weight- lb/PIW 0.1250 lbs/PIW Carcass Type Cotton-Polyester Compound Black SBR Temperature Range (°F)- High 188 °F Temperature Range (°F)- Low 0 °F Special Characteristics: This premium belt features a cast polyurethane cover  ´thick. Recommended where highly abrasive cutting action would destroy a rubber-covered belt in short order. Particularly suitable for wear pads, cutting blocks, stamping operations, die cutting, roof tile manufacturing, and belt sanding units. Excellent for sharp steel parts and scrap. Available in various colors for special orders. Tension Rating (PIW) 90 PIW Belt Strength: Splice Instructions: Splice Step Yes Splice Finger No Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No No Static Conducting Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Flexco Plate/Rivet #5 R2 Flexco Hinged N/A Alligator Staple N/A Clipper Lace Suggested Fasteners: Alligator Lace #35 Belting Specification Sheet