b'Belting Specification SheetCatalog # 47 Pulley Diameter, MinimumItem number: 10590 Minimum Pulley Diameter 3.00 inDescription:4 Ply Hot Stock and Water Belt Strength:International Designation: Tension Rating (PIW) 120 PIWN/AConstruction: Splice Instructions:Compound Top Cover White Bare Duck Splice Step YesColor White Splice Finger NoTop Cover Thickness (in) (0.00 mm) 0.00 inTop Cover Description White Bare Duck Other:Static Conducting NoCompound Bottom Cover Black SBR Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoOil Resistant NoNumber of Plies 4 Fire Resistant NoOverall Gauge (in) (4.76 mm)3/16 in FDA Approved NoUnit Weight- lb/PIW 0.0880 lbs/PIWSuggested Fasteners:Carcass Type Cotton-Polyester Flexco Plate/Rivet N/ACompound Black SBR Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #125Clipper Lace #3Temperature Range (F)- Low -40 F Alligator Lace #25Special Characteristics:Bare duck surface down for lowest possible friction for slider bed use, and up for deflector bar applications; ideal as slip-top belt for stall\x03operations. Its true use is for conveying uncured rubber in tire plants.*****All Values are nominal and subject to change without notice.*****'