Catalog # 46a Description: 3 Ply Red Silicone Covered HSW International Designation: N/A Item number: 10586 Pulley Diameter, Minimum Minimum Pulley Diameter 3.00 in Construction: Compound Top Cover Color Silicone Red Silicone Red Top Cover Description (0.79 mm) 1/64 in Top Cover Thickness (in) Bottom Cover Description Friction Surface Compound Bottom Cover Black SBR Bottom Cover Thickness (in) (0.00 mm) 0.00 in Number of Plies 3 Overall Gauge (in) (3.56 mm) 1/8 in Unit Weight- lb/PIW 0.0560 lbs/PIW Carcass Type Cotton-Polyester Compound Black SBR Temperature Range (°F)- High 500 °F Temperature Range (°F)- Low -100 °F Special Characteristics: Specially designed for applications requiring release of wet, sticky, or warm products like uncured rubber and PVC. These belts are used primarily in the tire and rubber industry. Cover surface rated for up to 500 Degree Material - Carcass rated at 250 Degrees. *DO NOT USE IN OVEN APPLICATIONS* Coatings available in different colors and thicknesses. Other base belts available, priced on application. Tension Rating (PIW) 90 PIW Belt Strength: Splice Instructions: Splice Step Yes Splice Finger No Other: Cross Rigid High Heat No Yes Impression Top No Oil Resistant No No Static Conducting Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Flexco Plate/Rivet #2 N/A Flexco Hinged N/A Alligator Staple #125 Clipper Lace Suggested Fasteners: Alligator Lace #15 Belting Specification Sheet