b'Belting Specification SheetCatalog # 41 Pulley Diameter, MinimumItem number: 10886 Minimum Pulley Diameter 6.00 inDescription:5 Ply CP30 Tan FS x FS Belt Strength:International Designation: Tension Rating (PIW) 150 PIWN/AConstruction: Splice Instructions:Compound Top Cover Tan SBR Splice Step YesColor Tan Splice Finger NoTop Cover Thickness (in) (0.00 mm) 0.00 inTop Cover Description Friction Surface Other:Static Conducting NoCompound Bottom Cover Tan SBR Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoOil Resistant NoNumber of Plies 5 Fire Resistant NoOverall Gauge (in) (6.35 mm)1/4 in FDA Approved NoUnit Weight- lb/PIW 0.1370 lbs/PIWSuggested Fasteners:Carcass Type Cotton-Polyester Flexco Plate/Rivet R2Compound Tan SBR Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #187Clipper Lace #4-1/2Temperature Range (F)- Low -40 F Alligator Lace #27Special Characteristics:Commonly known as friction surface and/or transmission belting, this belt has long been a standard for a wide variety of conveyor applications for both slider bed and roller applications. Construction is cotton/polyester fabric plies bonded with resilient rubber compounding, either side to pulley, vulcanized endless or mechanical splice.*****All Values are nominal and subject to change without notice.*****'