Catalog # 16h Description: WearSlide Non-Woven 1.5 CFM Abrasion Resistant International Designation: N/A Item number: 34228 Pulley Diameter, Minimum Minimum Pulley Diameter 0.00 in Construction: Compound Top Cover Color Impregnated White Nitrile White Top Cover Description (0.00 mm) 0.00 in Top Cover Thickness (in) Bottom Cover Description Impregnated Compound Bottom Cover White Nitrile Bottom Cover Thickness (in) (0.00 mm) 0.00 in Number of Plies 1 Overall Gauge (in) (6.35 mm) 1/4 in Unit Weight- lb/PIW 0.0550 lbs/PIW Carcass Type Needled Polyester Compound White Nitrile Temperature Range (°F)- High 310 °F Temperature Range (°F)- Low -60 °F Special Characteristics: Designed specifically for air gravity conveyors. Used to fluidize dry bulk powders such as: cement, barite, silica, alumina, etc.. Provides several advantages over woven air permeable fabrics because it does not require stretching prior to installation and will not unravel when cut or punched. Abrasion resistant WearSlide combines the best features of non-woven polyester with the durability of rubber. Tension Rating (PIW) 60 PIW Belt Strength: Splice Instructions: Splice Step No Splice Finger No Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No No Static Conducting Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Flexco Plate/Rivet N/A N/A Flexco Hinged N/A Alligator Staple N/A Clipper Lace Suggested Fasteners: Alligator Lace N/A Belting Specification Sheet