Catalog # 204W Description: ZL Tan NR Diamond Impression x FS International Designation: Tan NR Diamond Impression x FS Item number: 33293 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (101.60 mm) 4.0000 in (203.20 mm) 8.0000 in Construction: Compound Top Cover Wedgegrip Tan NR Top Cover Description (5.60 mm) 0.2205 in Top Cover Thickness (in) Bottom Cover Description Friction Surface Compound Bottom Cover Tan NR Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static No Overall Gauge (in) (7.20 mm) 0.2834 in Unit Weight- lb/PIW 0.1250 lbs/PIW Material Between Plies Spiral Polyester Maximum Width (in) 72 in Temperature Range (°F)- High 250 °F Temperature Range (°F)- Low 0 °F Top Cover Shore 40 N/A Bottom Cover Shore Special Characteristics: N/A Pull for 1% Elongation (26 N/mm) 150 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process n/a Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top Yes Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet