b'Light Weight Belting Specification SheetCatalog # 204W Pulley Diameter, MinimumItem number: 33293Description:ZL Tan NR Diamond Impression x FSInternational Designation:Tan NR Diamond Impression x FS A) Normal Flex (101.60 mm) 4.0000 inB) Back Flex (203.20 mm) 8.0000 inConstruction:Compound Top Cover Tan NR Belt Strength:Top Cover Thickness (in) (5.60 mm) 0.2205 in Pull for 1% Elongation (26 N/mm) 150 lbs/sq inTop Cover Description WedgegripTop Cover Shore 40 Splice Instructions:Compound Bottom Cover Tan NR Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process n/aBottom Cover Description Friction SurfaceBottom Cover Shore N/ANumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will show different results.We recommend that you do a test splice with your Anti Static No press before attempting the actual belt splice.Overall Gauge (in) (7.20 mm) 0.2834 inUnit Weight- lb/PIW 0.1250 lbs/PIW Other:Material Between Plies Spiral PolyesterMaximum Width (in) 72 in Cross Rigid YesTemperature Range (F)- High 250 F High Heat NoTemperature Range (F)- Low 0 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:N/A*****All Values are nominal and subject to change without notice.*****'