Catalog # 170 Description: 3 Ply 120 Grey 50A 20mm Diamond x Bare International Designation: EPQ CB50 SP108 Item number: 42200 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (203.20 mm) 8.0000 in (228.60 mm) 9.0000 in Construction: Compound Top Cover SP108 20mm Diamond Grey NR/SBR Top Cover Description (6.35 mm) 0.2500 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover n/a Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static No Overall Gauge (in) (10.41 mm) 0.4100 in Unit Weight- lb/PIW 0.1750 lbs/PIW Material Between Plies SBR Maximum Width (in) 65 in Temperature Range (°F)- High 220 °F Temperature Range (°F)- Low 20 °F Top Cover Shore 50A N/A Bottom Cover Shore Special Characteristics: Non-Marking. Good grip and surface calibration accuracy for wood finishing machine belts. Shore A 50 durometer maintains a a high friction contact surface for sheet puller belts or light incline applications. Pull for 1% Elongation (21 N/mm) 120 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Step Hot Press Temperature (°F) 300 °F Press Pressure (psi) 75 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top Yes Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet