Catalog # 171 Description: 3 Ply 170 Grey 50A 5mm x Bare International Designation: TED100/3 PA50 5+0 Item number: 42201 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (152.40 mm) 6.0000 in (177.80 mm) 7.0000 in Construction: Compound Top Cover Smooth Grey NR/BR Top Cover Description (5.00 mm) 0.1970 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover n/a Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static No Overall Gauge (in) (8.53 mm) 0.3360 in Unit Weight- lb/PIW 0.1700 lbs/PIW Material Between Plies SBR Maximum Width (in) 130 Temperature Range (°F)- High 220 °F Temperature Range (°F)- Low 20 °F Top Cover Shore 50A N/A Bottom Cover Shore Special Characteristics: Balanced S-Z twist weave and heat treated for better tracking and edge stability. Strong micro-weave structure allows great pulley wrap and lace retention at high speeds. Non-marking, high grip cover-even in damp or unclean conditions. Abrasion and tear resistant-will extend the service life over natural gum, SBR or PVC compounds. Pull for 1% Elongation (30 N/mm) 170 °F Belt Strength: Splice Instructions: Foil No Splice Process Step Hot Press Temperature (°F) 300 °F Press Pressure (psi) 75 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet