Catalog # 136W Description: 3 Ply CR135 WST AS SFMB International Designation: E24/3 0/N31 ST White AS Item number: 10966 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (152.40 mm) 6.0000 in (304.80 mm) 12.0000 in Construction: Compound Top Cover Smooth White Nit Top Cover Description (3.18 mm) 0.1250 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Treated Duck Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static Yes Overall Gauge (in) (6.60 mm) 0.2600 in Unit Weight- lb/PIW 0.1401 lbs/PIW Material Between Plies Nitrile Maximum Width (in) 72 in Temperature Range (°F)- High 212 °F Temperature Range (°F)- Low 20 °F Top Cover Shore 55 N/A Bottom Cover Shore Special Characteristics: The 136W has a special 3 ply highly cross rigid construction designed for SFMB (Surface Finishing Machine Belt) applications. The belt features a high friction, non-marking, oil resistant cover and low friction bottom fabric. Developed specifically for use on machines finishing metal parts Pull for 1% Elongation (24 N/mm) 135 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Step Cold Press Temperature (°F) 300 °F Press Pressure (psi) 30 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet