Catalog # 134SG Description: 2 Ply Poly 65 Black PVC Sand Grit AS FR International Designation: EM12/2 0/V7 Black Sand Grit AS FR Item number: 10796 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (44.45 mm) 1.7500 in (88.90 mm) 3.5000 in Construction: Compound Top Cover Grit Black PVC Top Cover Description (0.70 mm) 0.0276 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.90 mm) 0.1142 in Unit Weight- lb/PIW 0.0614 lbs/PIW Material Between Plies PVC Maximum Width (in) 84 in Temperature Range (°F)- High 180 °F Temperature Range (°F)- Low 20 °F Top Cover Shore 70 0.000000 Bottom Cover Shore Special Characteristics: This 2 ply multifilament belt is most commonly used for power turn applications. The 134SG demonstrates good rip, tear, elongation, and fastener holding capability. The combination of the sand grit impression and the ultra modified cover compound results in a long lasting gripping top cover that is designed for a various packaging handling applications. Having a low friction, static conductive bottom fabric is ideal for slider-bed applications. Pull for 1% Elongation (11 N/mm) 65 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top Yes Oil Resistant No Fire Resistant Yes FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet