b"Belting Specification SheetCatalog # 15a Pulley Diameter, MinimumItem number: 10692 Minimum Pulley Diameter 3.00 inDescription:3 Ply 150 Tan Nitrile COS Belt Strength:International Designation: Tension Rating (PIW) 150 PIWN/AConstruction: Splice Instructions:Compound Top Cover Tan Nitrile Splice Step YesColor Tan Splice Finger NoTop Cover Thickness (in) (0.79 mm)1/32 inTop Cover Description Smooth Other:Static Conducting NoCompound Bottom Cover Tan Nitrile Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoOil Resistant YesNumber of Plies 3 Fire Resistant NoOverall Gauge (in) (3.57 mm)9/64 in FDA Approved YesUnit Weight- lb/PIW 0.0700 lbs/PIWSuggested Fasteners:Carcass Type Polyester Flexco Plate/Rivet N/ACompound Tan Nitrile Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #125Clipper Lace #2Temperature Range (F)- Low 0 F Alligator Lace #15Special Characteristics:Tan belts are popular on inspection lines because they are less tiresome on the inspectors' eyes. Also, tan is commonly used in fruit and vegetable processing because of its greater resistance to staining. This belt features a strong, all polyester carcass and is FDA accepted.*****All Values are nominal and subject to change without notice.*****"