Catalog # 138 Description: 2 Ply 160 Black LI x B FR International Designation: EM28/2 0/15 SBR Black LI x B FR Item number: 22584 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (50.80 mm) 2.0000 in (101.60 mm) 4.0000 in Construction: Compound Top Cover Impression Textured Black SBR Top Cover Description (1.52 mm) 0.0600 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Treated Duck Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (3.43 mm) 0.1350 in Unit Weight- lb/PIW 0.0733 lbs/PIW Material Between Plies SBR Maximum Width (in) 72 in Temperature Range (°F)- High 180 °F Temperature Range (°F)- Low -30 °F Top Cover Shore 55 N/A Bottom Cover Shore Special Characteristics: The 138 is specifically used for power turn applications in airports and distributions centers. The top cover is a 1.5 mm thick SBR with a light impression for excellent grip and wear resistance, this belt is also flame retardant. Pull for 1% Elongation (28 N/mm) 160 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Step Hot Press Temperature (°F) 300 °F Press Pressure (psi) 30 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top Yes Oil Resistant No Fire Resistant Yes FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet