Catalog # 131 Description: 2 Ply Poly 69 Green PVC x Bare AS International Designation: EM12/2 0/V7 Green AS Item number: 10865 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (50.00 mm) 1.9685 in (75.00 mm) 2.9527 in Construction: Compound Top Cover Smooth Green PVC Top Cover Description (0.70 mm) 0.0276 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.40 mm) 0.0945 in Unit Weight- lb/PIW 0.0495 lbs/PIW Material Between Plies PVC Maximum Width (in) 102 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 80 N/A Bottom Cover Shore Special Characteristics: The 131 belt is a good economical choice for non-food grade applications. this belt is most commonly used for Power Turn applications in printing and packaging. The top cover is a durable 0.07 mm thick green PVC suitable for abrasion resistance in package handling for power turn belts. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet