Catalog # 132B Description: 2 Ply Poly 69 Blue PU NA FDA International Designation: EM12/2 0/U2 Blue PU NA Item number: 10762 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (10.00 mm) 0.3937 in (40.00 mm) 1.5748 in Construction: Compound Top Cover Matte Blue PU Top Cover Description (0.20 mm) 0.0079 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static No Overall Gauge (in) (1.80 mm) 0.0709 in Unit Weight- lb/PIW 0.0376 lbs/PIW Material Between Plies PU Maximum Width (in) 102 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 87 N/A Bottom Cover Shore Special Characteristics: The 132B is specifically manufactured for Beltservice with a blue PU cover and a high strength multifilament carcass most commonly used for Power Turn applications. This unique blue PU cover is suitable for applications for direct food contact and stain resistance due to oils and fat saturation. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet