Catalog # 139C Description: NW 60 Green NA International Designation: NW 60 Green NA Item number: 26568 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (127.00 mm) 5.0000 in (127.00 mm) 5.0000 in Construction: Compound Top Cover Non-Woven Polyester Fleece Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description Non-Woven Compound Bottom Cover Polyester Fleece Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static No Overall Gauge (in) (5.64 mm) 0.2220 in Unit Weight- lb/PIW 0.0580 lbs/PIW Material Between Plies N/A Maximum Width (in) 72 in Temperature Range (°F)- High 250 °F Temperature Range (°F)- Low 14 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: This belt is designed for wear and cut resistance, soft impact surface, high temperature resistance up to 250° F, and is quiet running with the felt type construction. Most common industries using this belt are the automotive industry, airports, package handling, packing lines and cutting machines. Pull for 1% Elongation (18 N/mm) 100 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Skive Press Temperature (°F) 180 °F Press Pressure (psi) 18 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet