Catalog # 140Q Description: QB 120 Blk F x F FR International Designation: TM120 FBS FR Item number: 25159 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (39.88 mm) 1.5700 in (39.88 mm) 1.5700 in Construction: Compound Top Cover Friction Surface Polyester Fleece Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description Friction Surface Compound Bottom Cover Polyester Fleece Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static No Overall Gauge (in) (2.50 mm) 0.0984 in Unit Weight- lb/PIW 0.0500 lbs/PIW Material Between Plies PVC Maximum Width (in) 72 in Temperature Range (°F)- High 160 °F Temperature Range (°F)- Low -10 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: This belt is designed for Horizontal package handling, transport conveying, stackers, feeder and sorters. A low co- efficient of friction allows a quiet running belt on slider beds, ideal for distribution centers and sort centers. Excellent for Pro Turn power turn applications in the package handling industry and airports. The 140Q is flame retardant to ASTM D378 standards. The needled woven polyester fabric construction is specially designed for fastener holding capability. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Skive Press Temperature (°F) 180 °F Press Pressure (psi) 18 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet