Catalog # 139A Description: NW 25 Black HC International Designation: NW 25 HC SF Black Item number: 24230 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (38.10 mm) 1.5000 in (76.20 mm) 3.0000 in Construction: Compound Top Cover Smooth Polyester Fleece Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description Non-Woven Compound Bottom Cover Polyester Fleece Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static Yes Overall Gauge (in) (2.60 mm) 0.1024 in Unit Weight- lb/PIW 0.0290 lbs/PIW Material Between Plies N/A Maximum Width (in) 72 in Temperature Range (°F)- High 250 °F Temperature Range (°F)- Low 14 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: This belt is manufactured with a nonwoven construction that is highly conductive, wear and cut resistant, quiet running and offers a soft impact surface. Commonly used in automotive applications, mail and post sorting systems, airport luggage handling and distributions centers. This belt resembles a felt like construction suitable for conveying plastic parts or electronic components. Pull for 1% Elongation (15 N/mm) 85 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Skive Press Temperature (°F) 180 °F Press Pressure (psi) 18 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet