Catalog # 104AS Description: 2 Ply Poly CR45 White PU AS Bare x Bare AS FDA International Designation: E8/2 U0/U0 White AS FDA Item number: 10802 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (9.91 mm) 0.3900 in (9.91 mm) 0.3900 in Construction: Compound Top Cover PU Impregnated Polyester Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (1.30 mm) 0.0512 in Unit Weight- lb/PIW 0.0239 lbs/PIW Material Between Plies PU Maximum Width (in) 78 in Temperature Range (°F)- High 194 °F Temperature Range (°F)- Low -4 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: The 104AS meets FDA compliance standards. The 104AS has a low friction anti static polyester fabric on both top and bottom sides with a PU center skim. This belt is an excellent choice for accumulation, diverting, bakeries, material handling, packaging and paper converting applications. Pull for 1% Elongation (8 N/mm) 45 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 324 °F Press Pressure (psi) 21 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet