Catalog # 104 Description: 2 Ply Poly CR45 White PVC Bare x Bare FDA International Designation: E8/2 0/V/0 White NA FDA Item number: 10834 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (39.98 mm) 1.5740 in (39.98 mm) 1.5740 in Construction: Compound Top Cover Bare Polyester Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static No Overall Gauge (in) (1.60 mm) 0.0630 in Unit Weight- lb/PIW 0.0307 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 14 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: The 104 meets FDA compliance standards. This is an excellent belt for accumulation and diverting applications. The 104 has good resistance to animal, mineral and vegetable oils and fats. Most commonly used for bakeries, biscuit and pastries, bread and dough applications. Pull for 1% Elongation (8 N/mm) 45 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 20 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet