Catalog # 104ASHD Description: 2 Ply Poly CR69 White PU AS Bare x Bare AS FDA International Designation: E12/2 UO/UO White AS FDA Item number: 41887 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (50.00 mm) 1.9685 in (50.00 mm) 1.9685 in Construction: Compound Top Cover PU Impregnated Polyester Top Cover Description (0.00 mm) 0.0000 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (1.60 mm) 0.0630 in Unit Weight- lb/PIW 0.0300 lbs/PIW Material Between Plies PU Maximum Width (in) 78 Temperature Range (°F)- High 194 °F Temperature Range (°F)- Low -4 °F Top Cover Shore N/A N/A Bottom Cover Shore Special Characteristics: The 104ASHD meets FDA compliance standards. The 104ASHD has a low friction anti static polyester fabric on both top and bottom sides with a PU center skim. This belt is an excellent choice for magnetic/vacuum stacker conveyors in metal blanking operations, accumulation and material handling applications. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 324 °F Press Pressure (psi) 21 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid Yes Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet