Catalog # 118R Description: 2 Ply Poly CR79 Red PVC LG x Bare AS International Designation: E14/2 0/V45 Red LG x B AS Item number: 25036 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (50.04 mm) 1.9700 in (79.76 mm) 3.1400 in Construction: Compound Top Cover Longitudinally Grooved Red PVC Top Cover Description (4.57 mm) 0.1800 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (6.35 mm) 0.2500 in Unit Weight- lb/PIW 0.1175 lbs/PIW Material Between Plies PVC Maximum Width (in) 78 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 23 °F Top Cover Shore 45 N/A Bottom Cover Shore Special Characteristics: This 2 Ply Red Longitudinal Groove belt offers maximum flexibility in a belt with a high grip 4.5mm thick top cover and small 2" minimum pulley allowance. For use in corrugated box applications, inclines/declines and indexing conveyors where speed sorting is required. This belt will out perform all PVC Rough Top belts for case taper applications by 3-4 times the life. Pull for 1% Elongation (14 N/mm) 79 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top Yes Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet