Catalog # 2B20 Description: 2 Ply Poly 69 Clear PO x FS AS FDA International Designation: ES 12/2 PO0/PO6 Clear AS FDA Item number: 41997 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (80.00 mm) 3.1496 in (120.00 mm) 4.7244 in Construction: Compound Top Cover Matte Thermoplastic Polyolefine Top Cover Description (0.60 mm) 0.0236 in Top Cover Thickness (in) Bottom Cover Description Impregnated Compound Bottom Cover PO Impregnated Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static No Overall Gauge (in) (2.60 mm) 0.1024 in Unit Weight- lb/PIW 0.0410 lbs/PIW Material Between Plies Thermoplastic Polyolefine Maximum Width (in) 118 Temperature Range (°F)- High 140 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 90 N/A Bottom Cover Shore Special Characteristics: #2B20 has a high release thermoplastic Polyolefin cover that is suitable for conveying tobacco and any sticky food product. It is also perfect for use in wood finishing plants on spray booth conveyors where stain and lacquer overspray needs to be wiped from the belt surface. Pull for 1% Elongation (12 N/mm) 68 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Finger Press Temperature (°F) 0 °F Press Pressure (psi) 0 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid Yes Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet