Catalog # 118LT Description: 2 Ply Poly CR57 Green PVC Lattice x QW AS International Designation: E10/2 0/V13 Green LT x AS QW Item number: 10850 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (69.85 mm) 2.7500 in (119.89 mm) 4.7200 in Construction: Compound Top Cover Lattice Green PVC Top Cover Description (1.30 mm) 0.0511 in Top Cover Thickness (in) Bottom Cover Description Quiet Weave Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.79 mm) 0.1100 in Unit Weight- lb/PIW 0.0494 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 140 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 35 N/A Bottom Cover Shore Special Characteristics: The 118LT belt consist of a soft 35 Shore A durometer lattice top cover profile. It is excellent for high grip on incline or declines conveyors, indexing or high speed sorter lines in distribution centers. The pulley side has a low noise polyester monofilament carcass that is preferred for reducing the decibel levels in distribution centers. Pull for 1% Elongation (10 N/mm) 57 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top Yes Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet