Catalog # 116J Description: 2 Ply Poly CR57 Green PVC Jink RT x QW International Designation: E10/2 0/V37 Green Jink RT x QW NA Item number: 29382 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (59.94 mm) 2.3600 in (99.82 mm) 3.9300 in Construction: Compound Top Cover Roughtop Green PVC Top Cover Description (3.70 mm) 0.1456 in Top Cover Thickness (in) Bottom Cover Description Quiet Weave Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (5.30 mm) 0.2086 in Unit Weight- lb/PIW 0.0750 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 140 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 35 N/A Bottom Cover Shore Special Characteristics: The 116J has a soft 35 shore A green PVC wavy rough top cover that makes this a great choice incline/decline applications. Most commonly used in distribution centers for sorting, indexing and case taper belts. The PVC top cover profile is a wavy design to help reduce noise on snub rollers, it also eliminates the vibration or jumping effect from small diameter snub rollers. Consider this belt in applications where small pulleys are needed. Pull for 1% Elongation (10 N/mm) 57 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top Yes Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet