Catalog # 145 Description: 3 Ply Poly CR125 Gray PVC C x Bare AS International Designation: E22/3 0/V20 Gray AS Item number: 10868 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (120.00 mm) 4.7244 in (150.00 mm) 5.9055 in Construction: Compound Top Cover Smooth Gray PVC Top Cover Description (2.00 mm) 0.0787 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static Yes Overall Gauge (in) (4.88 mm) 0.1920 in Unit Weight- lb/PIW 0.0950 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 180 °F Temperature Range (°F)- Low 5 °F Top Cover Shore 83 N/A Bottom Cover Shore Special Characteristics: This belt has a high tensile strength 3 ply polyester construction which is ideal for low stretch and heavy loads. The cover is a full 2.0 mm thick 83 durometer gray PVC that is abrasion resistant, oil and fat resistant. The three plies are made up of polyester monofilament with lateral stability, this makes the belt ideal for hoodwall belt applications. Pull for 1% Elongation (22 N/mm) 125 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Double Finger Press Temperature (°F) 360 °F Press Pressure (psi) 28 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet