Catalog # 116B Description: 3 Ply Poly CR125 Gray ST x Bare AS International Designation: E22/3 0/ASV20 Gray ST Item number: 10870 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (119.89 mm) 4.7200 in (150.11 mm) 5.9100 in Construction: Compound Top Cover Sticky Top Gray PVC Top Cover Description (2.00 mm) 0.0787 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static Yes Overall Gauge (in) (4.80 mm) 0.1889 in Unit Weight- lb/PIW 0.0991 lbs/PIW Material Between Plies PVC Maximum Width (in) 92 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 23 °F Top Cover Shore 45 N/A Bottom Cover Shore Special Characteristics: The 116B is a high grade PVC that offers increased oil resistance and improved abrasion resistance. 3 Ply Monofilament weft carcass construction offers high load bearing capacity, stable tracking and excellent fastener retention. Excellent for heavy loads and applications where impact and extreme service conditions are common. Used commonly as folding rail belts belt in corrugated box plants. Pull for 1% Elongation (22 N/mm) 125 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Double Finger Press Temperature (°F) 330 °F Press Pressure (psi) 28 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet