Catalog # 116A Description: 2 Ply Poly 86 Blue AS PVC ST x Bare International Designation: E15/2 0/V20AS Blue PVC x B Item number: 10764 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (80.01 mm) 3.1500 in (99.82 mm) 3.9300 in Construction: Compound Top Cover Sticky Top Blue PVC Top Cover Description (2.00 mm) 0.0787 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (4.10 mm) 0.1614 in Unit Weight- lb/PIW 0.0816 lbs/PIW Material Between Plies PVC Maximum Width (in) 79 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 23 °F Top Cover Shore 45 N/A Bottom Cover Shore Special Characteristics: The soft 45 durometer top cover makes this belt an excellent choice for steep inclines/declines. Used in applications such as package handling, small parts conveying and moving plastic containers up inclines. When using this type of belt, special care should be taken to keep dust to a minimum, clean with a denatured alcohol only. Excellent belt for compression applications requiring positive product contact. Pull for 1% Elongation (15 N/mm) 86 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet