Catalog # 115 Description: 2 Ply Poly 57 Light Green PVC C x IP AS International Designation: E10/2 V10IP/V10 Green AS Item number: 10776 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (80.01 mm) 3.1500 in (80.01 mm) 3.1500 in Construction: Compound Top Cover Smooth Green PVC Top Cover Description (1.00 mm) 0.0393 in Top Cover Thickness (in) Bottom Cover Description Inverted Pyramid Compound Bottom Cover Green PVC Bottom Cover Thickness (in) (1.00 mm) 0.0393 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (3.00 mm) 0.1181 in Unit Weight- lb/PIW 0.0597 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 14 °F Top Cover Shore 70 70 Bottom Cover Shore Special Characteristics: The 115 is a general purpose conveyor belt used when a cover is needed on both sides of the belt. This belt has a smooth PVC top cover and inverted pyramid bottom cover. Commonly used in material handling applications on roller bed conveyors or non slider bed systems. This belt can be utilized in many troughing applications, especially roller style conveyor beds. Pull for 1% Elongation (10 N/mm) 57 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet