Catalog # 112HCR Description: 2 Ply Poly HCR 69 Black PVC M AS International Designation: E12/2 U0/V5 M AS Item number: 41735 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (60.00 mm) 2.3622 in (90.00 mm) 3.5433 in Construction: Compound Top Cover Matte Black PVC Top Cover Description (0.50 mm) 0.0197 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.70 mm) 0.1063 in Unit Weight- lb/PIW 0.0512 lbs/PIW Material Between Plies PVC Maximum Width (in) 78 in Temperature Range (°F)- High 158 °F Temperature Range (°F)- Low 14 °F Top Cover Shore 70 N/A Bottom Cover Shore Special Characteristics: The 112HCR is a highly cross rigid monofilament carcass designed specifically for horizontal to incline or ³Z´shaped conveying systems. The top cover is a 70A durometer and 0.5mm thick for standard conveying of lightweight parts or plastics, the carcass is a 12N/mm strength fabric for low stretch and antistatic properties. The PVC cover has limited oil and grease resistance, while offering excellent release with the matte finish surface. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet