Catalog # 111A Description: 2 Ply Poly CR46 Green PVC C x Bare AS International Designation: E8/2 0/V5 Green AS Item number: 10812 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (29.97 mm) 1.1800 in (49.78 mm) 1.9600 in Construction: Compound Top Cover Gloss Green PVC Top Cover Description (0.50 mm) 0.0196 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.00 mm) 0.0787 in Unit Weight- lb/PIW 0.0358 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 5 °F Top Cover Shore 80 N/A Bottom Cover Shore Special Characteristics: The 111A is a general purpose conveyor belt. A smooth PVC top cover and anti static carcass makes this an excellent belt for the paper converting and textile industries. This belt can be used in a variety of industrial applications due to its dimensional stability and strength. Pull for 1% Elongation (8 N/mm) 46 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet