Catalog # 111B Description: 2 Ply Poly CR69 Green PVC C x B NA International Designation: E12/2 0/V1 Green PVC Gloss NA Item number: 32699 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (50.04 mm) 1.9700 in (100.08 mm) 3.9400 in Construction: Compound Top Cover Gloss Green PVC Top Cover Description (1.00 mm) 0.0393 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static No Overall Gauge (in) (2.79 mm) 0.1100 in Unit Weight- lb/PIW 0.0458 lbs/PIW Material Between Plies PVC Maximum Width (in) 118 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 5 PIW Top Cover Shore 70 N/A Bottom Cover Shore Special Characteristics: The 111B is a general purpose conveyor belt designed for cleating and sidewall belt applications. A smooth Glossy 1.0 mm thick 70 durometer PVC top cover offers a great option for eddy current applications for wear and abrasion resistance. This belt can be used in a variety of industrial applications due to its dimensional stability and strength. A strong 12n/mm strength gives you a strong carcass for low stretch and conveying heavy loads for recycling, distribution centers and automotive applications. Stocked in 118" wide widths for Marquip stacker applications in the corrugated box industry and many more wide applications. Pull for 1% Elongation (12 N/mm) 69 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet