Catalog # 117A Description: 3 Ply Poly HCR 86 White PVC x Bare FDA International Designation: E15/3 0/V5 HCR White PVC Item number: 10878 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (100.00 mm) 3.9370 in (180.00 mm) 7.0866 in Construction: Compound Top Cover Matte White PVC Top Cover Description (0.50 mm) 0.0197 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 3 Anti Static Yes Overall Gauge (in) (3.90 mm) 0.1535 in Unit Weight- lb/PIW 0.0733 lbs/PIW Material Between Plies PVC Maximum Width (in) 79 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 14 °F Top Cover Shore 65 N/A Bottom Cover Shore Special Characteristics: The 117A is specifically manufactured with a 3 ply Highly Cross Rigid (HCR) monofilament carcass designed for use on conveyors with horizontal to incline and "Z" type conveyor configurations. The special monofilament cross members give it high rigidity with the ability to handle small pulley diameters. Pull for 1% Elongation (15 N/mm) 86 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 340 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet