b'Light Weight Belting Specification SheetCatalog # 111A Pulley Diameter, MinimumItem number: 10812Description:2 Ply Poly CR46 Petrol Green PVC C x Bare ASInternational Designation:E8/2 0/V5 Petrol Green AS A) Normal Flex (30.00 mm) 1.1811 inB) Back Flex (50.00 mm) 1.9685 inConstruction:Compound Top Cover Petrol Green PVC Belt Strength:Top Cover Thickness (in) (0.50 mm) 0.0196 in Pull for 1% Elongation (8 N/mm) 46 lbs/sq inTop Cover Description GlossTop Cover Shore 80 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.00 mm) 0.0787 inUnit Weight- lb/PIW 0.0358 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 5 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The 111A is a general purpose conveyor belt. A smooth PVC top cover and anti static carcass makes this an excellent belt for the paper converting and textile industries. This belt can be used in a variety of industrial applications due to its dimensional stability and strength.*****All Values are nominal and subject to change without notice.*****'