Catalog # 109 Description: 2 Ply Poly CR46 White IP NA FDA International Designation: E8/2 U0/V5 White IP FDA Item number: 10822 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (40.00 mm) 1.5748 in (60.00 mm) 2.3622 in Construction: Compound Top Cover Inverted Pyramid White PVC Top Cover Description (0.50 mm) 0.0196 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static No Overall Gauge (in) (2.20 mm) 0.0866 in Unit Weight- lb/PIW 0.0409 lbs/PIW Material Between Plies PVC Maximum Width (in) 78 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 14 °F Top Cover Shore 70 N/A Bottom Cover Shore Special Characteristics: The 109 meets FDA compliance standards. The Inverted Pyramid top cover increases the grip on product, excellent for slight inclines/declines of food products. This belt is resistant to oils, greases, salt and acids with low concentrations. Pull for 1% Elongation (8 N/mm) 46 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet