Catalog # 2B11 Description: 2 Ply Poly CR80 Clear PU x Bare AS FDA International Designation: E14/2 U0/U15 AS FDA Item number: 10772 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (119.89 mm) 4.7200 in (239.78 mm) 9.4400 in Construction: Compound Top Cover Gloss Clear PU Top Cover Description (1.50 mm) 0.0590 in Top Cover Thickness (in) Bottom Cover Description Bare Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (3.80 mm) 0.1496 in Unit Weight- lb/PIW 0.0733 lbs/PIW Material Between Plies PU Maximum Width (in) 118 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 94 N/A Bottom Cover Shore Special Characteristics: The 2B11 meets FDA compliance standards. This belt is an excellent choice for abusive applications requiring a cut resistant cover. The 2B11 is ideal for use in metal stamping, brick and tile plants, wood, glass and recycling applications. A commonly used belt on eddy current systems in the recycling industry as the thin cross section offers maximum rotor/field efficiency and the abrasion resistant polyurethane cover offers a high degree of abrasion and cut resistance. Pull for 1% Elongation (14 N/mm) 80 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Finger Press Temperature (°F) 330 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet