Catalog # 113D Description: 2 Ply Poly CR97 Green PU C x FI AS FDA International Designation: E17/2 U1/U10 Green AS FDA Item number: 10756 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (29.97 mm) 1.1800 in (49.78 mm) 1.9600 in Construction: Compound Top Cover Gloss Green PU Top Cover Description (1.00 mm) 0.0393 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Green PU Bottom Cover Thickness (in) (0.10 mm) 0.0039 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.15 mm) 0.0846 in Unit Weight- lb/PIW 0.0350 lbs/PIW Material Between Plies PU Maximum Width (in) 118 in Temperature Range (°F)- High 212 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 92 N/A Bottom Cover Shore Special Characteristics: The 113D belt is one of a kind, specifically manufactured for Beltservice with a full 1.0 mm thick 92A durometer PU cover. This belt is excellent for automotive applications, stamping plants and especially eddy current belts. This belt is stocked at 118" wide for the eddy current belts over 100" wide. Pull for 1% Elongation (17 N/mm) 97 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 21 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet