Catalog # 2B13 Description: IWP 150 3/32in Red Urethane x FS International Designation: EM26/M U0/U2 Red Item number: 24116 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (101.60 mm) 4.0000 in (177.80 mm) 7.0000 in Construction: Compound Top Cover Gloss Red PU Top Cover Description (1.98 mm) 0.0780 in Top Cover Thickness (in) Bottom Cover Description Friction Surface Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static No Overall Gauge (in) (5.08 mm) 0.2000 in Unit Weight- lb/PIW 0.1000 lbs/PIW Material Between Plies PVC Maximum Width (in) 72 in Temperature Range (°F)- High 180 °F Temperature Range (°F)- Low 20 °F Top Cover Shore 90 N/A Bottom Cover Shore Special Characteristics: This is an excellent belt for tough applications found in recycling, metal stamping and automotive plants. The 90 Shore A polyurethane top cover, combined with the friction impregnated bottom surface allows for endless reinforced finger splicing. Urethane cast cleats and sidewalls can be applied to the top cover for special applications. Pull for 1% Elongation (26 N/mm) 150 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat No No Impression Top No Oil Resistant No Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet