Catalog # 113 Description: 2 Ply Poly CR46 Dark Green PU Matte x Bare AS International Designation: E8/2 0/U3 M Green AS Item number: 10808 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (20.07 mm) 0.7900 in (39.88 mm) 1.5700 in Construction: Compound Top Cover Matte Green PU Top Cover Description (0.30 mm) 0.0120 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (1.40 mm) 0.0550 in Unit Weight- lb/PIW 0.0242 lbs/PIW Material Between Plies PU Maximum Width (in) 84 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low -4 °F Top Cover Shore 92 N/A Bottom Cover Shore Special Characteristics: The 113 belt has a matte finish green PU top cover that is abrasion resistant due to the 95 durometer top cover. This belt is generally used for non food grade applications in packaging or areas where they need a non glare top cover. Pull for 1% Elongation (8 N/mm) 46 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet